contents
 Overview   Standard Features   SystemsOptions   Options   Upgrades   TechSpecs
line.gif (50 bytes)
spacerw.gif (802 bytes) QuickSpecs

hp AlphaServer ES47
spacerw.gif (802 bytes)  

 

11507_OV.gif (107921 bytes)
spacerw.gif (802 bytes)
At A Glance

AlphaServerä ES47 systems

  • Two or four 1000-MHz Alpha 21364 processors
  • Advanced on-chip memory controllers and switch logic capable of providing 10.7-GB/s of peak memory bandwidth per processor
  • Choice of memory options; up to 4-GB of RDRAM memory per processor (16-GB total for a 4P system) - Future expansion to 8-GB/processor planned
  • Redundant features providing maximum uptime - N+1 Voltage regulator Modules (VRMs); hot- plug redundant power supplies; cooling provided by four hot-plug redundant system fans
  • Optional RAID memory support
  • Up to 32 PCI/PCI-X I/O slots (4P system with I/O expansion)
  • Up to four AGP slots (4P system with I/O expansion))
  • Internal hot-plug drive storage of 584 GB (4P system with 4 x 146-GB SCSI disk drives)
  • Integrated Ultra3 SCSI controller (one per System Building Block Drawer)
  • CD-RW drive
  • Dual USB port (one per System Building Block Drawer)
  • Enhanced reliability with ECC-protected memory, processor cache and system data paths
  • Tru64 UNIX or OpenVMS factory installed software (FIS); optional high availability support with Tru64 UNIX and OpenVMS cluster solutions
  • Product warranty, 1-year hardware, on-site next business day and 90-day software, telephone support delivered by HP Services   
  • Consult the HP Customer Support Center at 1-800-345- 1518 for details
contents
 Overview   Standard Features   SystemsOptions   Options   Upgrades   TechSpecs
line.gif (50 bytes)
spacerw.gif (802 bytes) Standard Features
Processor Two or four Alpha 21364 1000-MHz CPUs
   
Cache Memory 1.75-MB ECC L2 on-chip cache per CPU
Architecture Glue-less processor-to-processor multiprocessor architecture constructed from a set of basic components:
  • System Building Block Drawers
  • CPU Building Block Modules
  • I/O Expansion Drawers
 
CPUs, Memory, and I/O slots ES47 Model 2 ES47 Model 4
Maximum CPUs supported 2 4
Maximum memory supported Up to 8 GB Up to 16 GB
Maximum PCI/PCI-X slots supported 16 32
Maximum AGP slots supported 2 4
 
Storage Controller Integrated Ultra3 SCSI controller for internal disk drives (One per System Building Block Drawer)
 
Interfaces USB One Dual USB port per System Building Block Drawer
Server Management One MBM Server Management LAN Connection per System Building Block Drawer
Serial One MBM serial connection per System Building Block Drawer
 
Form Factor Rack (mounting slide rails included)
 
Boot/Diagnostic Devices CD-R Slim-line multi-bay 16X/10X/24X CD-RW
Hard Drives Choice of 18.2/36.4/72.8/146-GB SCSI disk drives
 
Internal Disk Expansion Total Internal Drive Bays Model 2 - Up to 2 drives may be mounted in the System Building Block Drawer
Model 4 - Up to 4 drives may be mounted in the two System Building Block Drawers
Up to 14 drives may be mounted in each optional StorageWorks Universal shelves
 
Power Supplies Two @208V (700–Watt @120V) 48V auto-sensing power supplies, hot swappable, N+1
Cabinets require power distribution units, North America or International variant
 
OS Support AlphaServer ES47Tru64 UNIX systems include pre-installed software, Base license, Unlimited User license, Server Extension license, Internet Express, and Secure Web Server
AlphaServer ES47 OpenVMS systems include pre-installed software, Base license with System Manager license and Enterprise Integration Server License Package for OpenVMS
Minimum OS support - Tru64 UNIX V5.1B + IPK or OpenVMS V7.3-1 plus VMS731-EV7_V0100 upgrade kit
NOTE: For the complete list of supported options, refer to the following Web page: http://h18002.www1.hp.com/alphaserver/options/ases47/
ases47_options.html
 
Service and Support Protected by HP Services including a 1-year on-site hardware warranty Training, consulting, network integration, software support, comprehensive system maintenance and guaranteed uptime services are also available for customers requiring higher levels of service and support.
contents
 Overview   Standard Features   SystemsOptions   Options   Upgrades   TechSpecs
line.gif (50 bytes)
spacerw.gif (802 bytes) SystemsOptions
Step 1 - Assess Application Requirements
  • Selection of system components must be made in the context of total application requirements. Although the configuration of system components must be done in steps (for example, base system, CPUs, memories, etc.), these steps should not be done in isolation.
  • The order in which requirements are assessed is also important, since one requirement may impact others. Before proceeding, it would be useful to assess the total application requirements in the following order:
  • What level of availability is required?
  • If no single points of failure are allowed, then the solution should be configured as a multi-system cluster.
  • If access to specific devices must be assured, consider redundant adapters, RAID, redundant I/O Expansion Drawers, etc.
  • What overall capacities are required in terms of performance, memory capacity, and disk storage?
  • How should the system be configured to optimize performance?
  • In most cases, optimum performance is achieved if the system resources (CPUs, memory and I/O adapters) are balanced across the System Building Blocks in the system.
  • Memory should be configured according to application guidelines listed in Step 4.
  • What are the near-term system expansion needs?
NOTE: Most configuration steps require that the above data be considered in whole or in part. Be sure to execute each step in the context of the total application requirements.
NOTE: Support for hard partioning and soft partioning (Galaxy) planned for a future date.
    
System Ordering Requirements:
Certain system components or services are either required for normal operation or are recommended for best system performance and/or operation. This document uses the following definitions to specify these options:
  • Mandatory purchase: The system cannot function without this option or service - the option or service must be ordered with the system.
  • Required to function: This option or service is needed to support a working system - the option or service must be ordered with the system or be available onsite.
  • Recommended: System performance or function will be enhanced if this option or service is ordered.
 
Step 1b - System Requirements
AlphaServer ES47 systems require selection of the following items:
Mandatory Purchases:
  • One Base System (see Step 2)
  • One CPU Building Block Module (see Step 3)
    •
  • Memory option(s) (see Step 4)
  • One system disk drive (see Step 5)
  • Ethernet adapter (See Step 11)
Optional Purchases:
  • Software media and documentation only required for first system onsite
  • Country-specific keyboard and mouse only if required (see Step 14)
  • See Step 7 for 11000 Series Cabinet, PDU, and Factory Integration Service if required
Recommended Services:
  • CarePaq Priority Service Plan
  
Server Management Hardware/Software Requirements
NOTE: The following Server Management requirements only apply to customers who prefer to use the AMS or AMU Server Management software.
  • The AlphaServer Management Station (AMS) provides the highest level of server management for a single or multi platform environment.
    The AMS provides for a local or remote web accessible central point of management and control for a multiple ES47/ES80/GS1280 environment
  • The AlphaServer Management Station (AMS) software requires the following hardware in order to operate:
    - Tru64 UNIX platform with 1-GB memory, 1-GB disk space, and two network interface cards running Tru64 UNIX V5.1B
  • The AlphaServer Management Utility provides the next highest level of server management. The AMU is a GUI based application that provides a sophisticated, yet user-friendly graphics interface to monitor and manage a single ES47/ES80/GS1280 system. From this application, the user can monitor the status of the platform, and provide a significant level of control of the platform. The AMU is a Web based utility, which allows a user local and remote access from a browser.
  • The AlphaServer Management Utility (AMU) requires one of the following hardware platforms in order to operate:
    - Wintel Platform running Windows 2000, 500-MHz CPU or faster, 1-GB memory, 10-GB disk space
    - Tru64 UNIX platform running V5.1B or later, 1-GB memory, 10-GB disk space
  • Both the AMS and AMU Software require Internet Explorer 5 or later or Netscape 6
Step 2 - Select base system
  • Mandatory selection of at least one Base System required
Base Systems include:
  • Model 2 systems include one System Building Block Drawer
  • Model 4 systems include two System Building Block Drawers

NOTE: Base systems do not include CPUs or memory (see Steps 3 and 4)
Each System Building Block Drawer includes:

  • Space for one CPU Building Block Module (CPU Building Block Module contains two processors (Step 3) and space for four memory options (Step 4)
  • Five PCI-X slots, one AGP slot
  • Two redundant power supplies
  • Two disk drive bays (see Step 5)
   
AlphaServer ES47 Base Systems
Model OS CPUs Supported
(See Step 3)		 I/O Slots Order No.
Model 2 Tru64 UNIX 2 5 PCI-X, 1 AGP DA-27AAA-AA
Model 2 OpenVMS 2 5 PCI-X, 1 AGP DY-27AAA-AA
Model 4 Tru64 UNIX 4 10 PCI-X, 2 AGP DA-47AAA-AA
Model 4 OpenVMS 4 10 PCI-X, 2 AGP DY-47AAA-AA
   
Step 3 - CPU Building Block Module - Mandatory
  • Mandatory selection of one CPU Building Block Module required per ES47 Model 2 system
  • Mandatory selection of two CPU Building Block Modules required per ES47 Model 4 system
  • CPU Building Block Module includes two Alpha 21364 CPUs
  • Selection of CPU Building Block Module type (Tru64 UNIX or OpenVMS) must match base system operating system selected in Step 2
AlphaServer ES47, Dual CPU Building Block, 2xEV7 CPUs, 1000-MHz, Tru64 UNIX SMP License 3X-KN73A-AB
AlphaServer ES47, Dual CPU Building Block, 2xEV7 CPUs, 1000-MHz, OpenVMS SMP License 3X-KN73A-AC
contents
 Overview   Standard Features   SystemsOptions   Options   Upgrades   TechSpecs
line.gif (50 bytes)
spacerw.gif (802 bytes) Options
Step 4- Memory - Mandatory
Memory Configuration Guidelines
Memory options should be selected in the context of the application’s sensitivity to memory bandwidth and future memory capacity expansion. This will determine the number of memory options to order. The total capacity required will determine the size of the options to be ordered.
  • Mandatory selection of memory option required
  • ES47 Model 2 systems require a minimum of one memory option
  • ES47 Model 2 systems ordered with one I/O Expansion Drawer requires a minimum of two memory options
  • ES47 Model 4 systems require a minimum of two memory options
  • ES47 Model 4 systems ordered with one I/O Expansion Drawer requires a minimum of three memory options
  • ES47 Model 4 systems ordered with two I/O Expansion Drawers require a minimum of four memory options
  • Each ES47 Model 2 system supports up to four memory options (four RIMMs each) and up to four memory RAID options
    (one RIMM each) for a total of 20 RIMMs.
  • ES47 Model 4 system supports up to eight memory options and up to eight memory RAID options for a total of 40 RIMMs.
  • If an I/O Expansion Drawer is ordered (see Step 6), both CPUs in the CPU Building Block Module connected to the I/O Drawer must contain memory in at least one memory controller.
  • Each CPU has two memory controllers – Each memory controller can support four RIMMs (one memory option) and a fifth
    RIMM slot for redundancy (RAID option).
  • If populated, the two memory controllers per CPU must contain the same size RIMMs.
  • Order one RAID option (one RIMM) per memory option if desired.
  • If RAID memory option is selected, the number of RAID options selected must equal the number of memory options selected.

The following examples illustrate different ways of configuring an ES47 Model 4 system with a total of 4 GB (1 GB per CPU)
    CPU Building Block Module 1 CPU Building Block Module 2
Memory Option CPU 1 CPU 2 CPU 3 CPU 4
Controller 1 Controller 2 Controller 1 Controller 2 Controller 1 Controller 2 Controller 1 Controller 2
3X-MS7AB-AA (4x128MB) 1 1 1 1 1 1 1 1
3X-MS7AB-BA (4x256MB) 1 - 1 - 1 - 1 -
3X-MS7AB-CA (4x512MB) 1 - - - 1 - - -
         
Memory Application Examples
Configuring memory is a compromise between cost, total memory capacity, and memory bandwidth requirements. The behavior of the application must be used to define the most-desired configuration. Some applications are sensitive to memory capacity while some are sensitive to memory bandwidth. If actual application measurements are not available, the following may be used as guidelines:
  • Large memory (VLM) applications, in which large amounts of memory can substantially reduce I/O, may be optimized for total memory capacity and future capacity growth. In VLM applications, the right balance might be one memory option per CPU. (Case B)
  • Typical commercial applications, such as transaction processing (OLTP) and multi-user timesharing, usually operate efficiently from cache and may not be materially affected by memory bandwidth. Memory configuration is a balance between memory bandwidth and future capacity growth. It is advisable to match the number of memory options to the number of CPUs. (Case B)
  • Data mining can benefit from additional memory bandwidth. In these cases, configure four memory options, two per CPU. (Case A)

The most demanding high-performance technical applications (HPTC) achieve a performance level that is directly proportional to memory bandwidth. In these cases, configure four memory options, two per CPU. (Case A)

512-MB RDRAM Memory (4x128) Option 3X-MS7AB-AA
512-MB RDRAM Memory (1x128) RAID Option 3X-MS7AB-AC
1-GB RDRAM Memory (4x256) Option 3X-MS7AB-BA
1-GB RDRAM Memory (1x256) RAID Option 3X-MS7AB-BC
2-GB RDRAM Memory (4x512) Option 3X-MS7AB-CA
2-GB RDRAM Memory (1x512) RAID Option 3X-MS7AB-CC
    
Step 5 - Select System Disk
  • Mandatory selection of at least one system disk drive is required for each ES47 system ordered. NOTE: Integrated Ultra3 SCSI controller and cabling included.
  • AlphaServer ES47 Model 2 systems support up to two internal hard disk drives
    •
  • AlphaServer ES47 Model 4 systems support up to four internal hard disk drives
36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3838-AA
72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3839-AA
146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3841-AA
18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3848-AA
36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3849-AA
72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3851-AA
I/O Configuration Guidelines:
  • Each System Building Block Drawer in an AlphaServer ES47 system supports six total slots spread over three buses (ports). The following details the internal I/O slots:
Port # Slot # Maximum Bus Speed Signal Voltage Number of Devices Supported
0 1 133 MHz 3.3 V 1 – 133 MHz or 66 MHz PCI-X or
1 – 66 or 33 MHz PCI
1 1 66 MHz 3.3 V 2 – 66 MHz PCI-X or
2 – 66 MHz PCI or
4 – 33 MHz PCI
2 66 MHz 3.3 V
3 66 MHz 3.3 V
4 66 MHz 3.3 V
3 1 2X AGP 1.5 V 1 – 1X or 2X AGP
NOTE: ES47 Model 2 Base Systems contain one System Building Block Drawer; ES47 Model 4 Base Systems contain two System Building Block Drawers
  • AlphaServer ES47 Model 2 system supports one optional I/O Expansion Drawer
  • AlphaServer ES47 Model 4 systems support up to two optional I/O Expansion Drawers
  • Each I/O Expansion Drawer supports 12 total slots spread over four buses (ports)
  
The following chart details the External I/O Expansion Drawer slots:
Port # Slot # Maximum Bus Speed Signal Voltage Number of Devices Supported
0 1 33 MHz 3.3V 1 – 33 MHz PCI
2 33 MHz 5.0V 1 – CCMAB-AA (Memory Channel) or
1 – CIPCA-BA or
2 – 3X- KZPBA-CC
(NOTE: No mixing of options within 5V slots)
3 33 MHz 5.0V
1 1 133 MHz 3.3V 2 – 66 or 33 MHz PCI or
2 – 66 MHz PCI-X or
1(1) – 133 MHz PCI-X
2 133 MHz 3.3V
2 1 66 MHz 3.3V 6 – 33 MHz PCI or
3(2) – 66 MHz PCI  or
2 – 66 MHz PCI- X
2 66 MHz 3.3V
3 66 MHz 3.3V
4 66 MHz 3.3V
5 66 MHz 3.3V
6 66 MHz 3.3V
3 1 2X AGP 1.5V 1 – 1X or 2X AGP
NOTE: (1) Two 133 MHz PCI-X devices are supported in Port 1, slots 1 and 2; they will however operate at 100 MHz.
(2) Five 66 MHz PCI devices are supported in Port 2, slots 1-5; they will however operate at 50 MHz.
Modules designed for 5.0v signaling and 33-MHz bus speed can only operate in Port 0 – slots 2 and 3 (reserved for Memory Channel or CIPCA)
Modules designed for 3.3v signaling and 66-MHz bus speed can not operate in Port 0 – slots 2 and 3
Universal PCI modules capable of operating at 66 MHz will operate at 33 MHz when placed in a 33-MHz slot
   
Step 6 - I/O System Expansion (Optional)
I/O Expansion Drawer
  • Model 2 systems support one I/O Expansion Drawer; Model 4 systems support up to two
  • I/O Expansion Drawers contain 11 PCI/PCI-X slots and one AGP 2X slot; an N+1 redundant power system
  • I/O Expansion Drawer required for memory channel network adapter or CIPCA (PCI-CI) adapter
I/O Expansion Drawer – Factory Installed 3X-BA70A-BA
I/O Expansion Drawer – Field Installable 3X-BA70A-ZB
I/O cable for connection between System Building Block Drawer and I/O Expansion Drawer shelves mounted in system power cabinet; one mandatory per each I/O Expansion Drawer ordered 3X-BNPCB-02
  
Step 7 - 11000 Series Cabinets
  • 11000 Series Cabinet enclosures support ES47 System Building Block Drawers, I/O Expansion Drawers, and StorageWorks shelves (see configuration chart below)
  • All ES47 Base Systems include all necessary hardware to mount the systems in an 11000-Series cabinet
  • All ES47 Base Systems include all required internal IEC/IEC power cords
  • 11000 Series Cabinets require the mandatory selection of the following items:
      1. 11000 Series Cabinets: 3X-H9A45-ZD (41U) or 3X-H9A40-ZA (34U)
      2. Three-phase Power Distribution Unit(s): Choice of 3X-H7606-AA (North America 120/208V) or 3X-H7606-AB (International 380/415V)
      3. Factory integration: YS-ASCAA-AA
  • 3X-H9A45-ZD/3X-H9A40-ZA includes one Cable/DSL Hub
NOTE: For configurations beyond those listed in the following chart, or for mounting ES47 systems in non-11000 series cabinet, contact CustomSystems.

Number of systems for mounting in 3X-H9A45-ZD (41U) Cabinet – Using one 30A
three-phase PDU (3X-H7606-AA/AB)

Number of I/O Drawers and/or DS43XX StorageWorks
Shelves for-mounting in
3X-H9A45-ZD (41U) Cabinet
   ES47 Model 2   ES47 Model 4 I/O Expansion
Drawers		 Max. DS43xx
SW Shelves		 Total U’s Consumed 3X-H9A45-ZD Cabinet Extra
U’s
Size in U's 4U   8U 4U 3U   41U  
Configuration #1 1   - 0 10 40 41 1
Configuration #2 1   - 1 9 41 41 0
Configuration #3 2 or 1 0 9 41 41 0
Configuration #4 2 or 1 1 7 39 41 2
Configuration #5 2 or 1 2 6 40 41 1
Configuration #6 3   - 0 7 39 41 2
Configuration #7 3   - 1 6 40 41 1
Configuration #8 3   - 2 5 41 41 0
Configuration #9 3   - 3 3 39 41 2
Configuration #10 4 or 2 0 6 40 41 1
Configuration #11 4 or 2 1 5 41 41 0
Configuration #12 4 or 2 2 3 39 41 2
Configuration #13 4    - 3 2 40 41 1
Configuration #14 4    - 4 1 41 41 0
NOTE: For redundancy on any configuration listed above, order second PDU (3X-H7606-AA/AB).
Each 3X-H9A45-ZD/3X-H9A40-ZA cabinet includes one Cable/DSL Hub. In order to fully utilize the Server Management capabilities,(i.e., running AMS or AMU software), each Model 2 or Model 4 system ordered must have a Cable/DSL Hub.
The Hub included with the cabinet supports the 1st system (Model 2 or Model 4) mounted in the cabinet.
An additional Hub is required for each additional system (Model 2 or Model 4) mounted in the cabinet.
For serial console or VGA operation of the system, the Cable/DSL Hub is not required.
   
Number of systems for mounting in
3X-H9A40-ZA (34U) Cabinet – Using one 30A three-phase PDU (3X-H7606-AA/AB)		 Number of I/O Drawers and/or DS43XX StorageWorks Shelves for mounting in 3X-H9A40-ZA (34U) Cabinet
  ES47 Model 2    ES47 Model 4 I/O Expansion
Drawers		 Max. DS43xx
SW Shelves		 Total U’s Consumed 3X-H9A40-ZA Cabinet Extra
U’s
Size in U's 4U   8U 4U 3U   34U  
Configuration #1 1   - 0 8 34 34 0
Configuration #2 1   - 1 6 32 34 2
Configuration #3 2 or 1 0 6 32 34 2
Configuration #4 2 or 1 1 5 33 34 1
Configuration #5 2 or 1 2 4 34 34 0
Configuration #6 3   - 0 5 33 34 1
Configuration #7 3   - 1 4 34 34 0
Configuration #8 3   - 2 2 32 34 2
Configuration #9 3   - 3 1 33 34 1
Configuration #10 4 or 2 0 4 34 34 0
Configuration #11 4 or 2 1 2 32 34 2
Configuration #12 4 or 2 2 1 33 34 1
Configuration #13 4   - 3 0 34 34 0
Configuration #14 4   - 3 0 34 34 0
NOTE: For redundancy on any configuration listed above, order second PDU (3X-H7606-AA/AB).
Each 3X-H9A45-ZD/3X-H9A40-ZA cabinet includes one Cable/DSL Hub. In order to fully utilize the Server Management capabilities, (i.e., running AMS or AMU softare) each Model 2 or Model 4 system ordered must have a Cable/DSL Hub.
The Hub included with the cabinet supports the 1st system (Model 2 or Model 4) mounted in the cabinet.
An additional Hub is required for each additional system (Model 2 or Model 4) mounted in the cabinet.
For serial console or VGA operation of the system, the Cable/DSL Hub is not required.
  
11000-Series Cabinets
11000-Series Cabinets 41U 11000-Series Cabinet 3X-H9A45-ZD
34U 11000-Series Cabinet 3X-H9A40-ZA
Power Distribution Unit – Mandatory
(if cabinet is ordered)		 120/208V Y or 200V, 30A NEMA L21-30P plug 3 x C19 outlets plus 24 x C13 outlets 3X-H7606-AA
380/415V Y, IEC 309 32A 6h/230/400~ plug 3 x C19 outlets plus 24 x C13 outlets 3X-H7606-AB
Factory Integration – Mandatory
(if cabinet is ordered)		 Factory Integration of systems and storage devices assembled and configured in cabinet enclosure in predefined locations YS-ASCAA-AA
Cable/DSL Hub - Optional Cable/DSL 8-port Hub – only required when more than one Model 2 or Model 4 is mounted in the same cabinet and the Server Management capabilities need to be fully utilized. 3X-DGHUB-AA
    
Step 8- Storage Adapters/Controllers
  Maximum # Supported



Speed

PCI/
PCI-
X
Slot		  
  Tru64 UNIX OpenVMS
 

Per
System		 Per
External I/O
Drawer		 Per 2P Building Block Drawer

Per
System		 Per External I/O Drawer Per 2P Building Block Drawer
SCSI
NOTE: Maximum storage controllers per systems all types - Tru64 UNIX: 32, OpenVMS: 26
PCI 2-port Ultra3 (LVD) SCSI adapter, 64-bit/66-MHz dual-channel (uses one PCI slot); includes internal 68-pin and external 68-pin VHDCI connectors; requires
3X-BC56J-xx cable to connect adapter to DS-SL13R-Bx shelf; HSZxx RAID controllers not supported. No shared SCSI or tape support, no SDLT tape support. No support for Model 4314R single-bus shelves with 3X-KZPEA-DB adapter. Tru64 UNIX requires graphics adapter to run console utilities (RUN BIOS).		 16 8 4 12 8 4 66 MHz 3.3V PCI

3X-KZPEA-DB
U160 cable, VHDCI to VHDCI (341174-B21 – 6-feet,
341175-B21 – 12-feet, 164604-B21 – 24-feet)
xx = 02 (6-feet), 03 (12-feet), 04 (24-feet) 		 

3X-BC56J-xx
 
PCI 1-port Ultra2 (LVD) SCSI adapter, 32-bit/33-MHz, single-channel (uses one PCI slot); includes internal
68-pin and external 68-pin HD connectors; order
BN38C-xx cable to connect adapter to Ultra3 shelf, or order VHDCI converter (BN38E-0B) for use with included cable; HSZxx RAID controllers not supported. No support for shared SCSI. 		8 8 4 8 8 4 33 MHz 3.3V PCI

3X-KZPCA-AA
 
PCI 1-port UltraSCSI wide differential 32-bit/33-MHz PCI adapter (uses one PCI slot); includes external 68-pin HD connector, requires BN38C-xx cable (2 to 25 meters) to connect adapter to differential UltraSCSI shelf or RAID controller 4 2 0 4 2 0 33 MHz 5V PCI

3X-KZPBA-CC
68-pin HD male-to-VHDCI male UltraSCSI cable;
xx = 02, 03, 05, 10, 20, meters		  

BN38C-xx
 
RAID
Ultra160 2-channel internal RAID controller with 128-MB cache.
NOTE: One controller supported per bus segment; supported only as a data device.		 - - - 1 1 1 66 MHz 3.3V PCI

3X-KZPDC-BE
Ultra160 4-channel internal RAID controller with 256-MB cache
NOTE: One controller supported per bus segment; supported only as a data device.		 - - - 1 1 1 66 MHz 3.3V PCI

3X-KZPDC-DF
Ultra160 cable, VHDCI to VHDCI (341174-B21 – 6-feet, 341175-B21 – 12-feet, 164604-B21 – 24-feet)
xx = 02 (6-feet), 03 (12-feet), 04 (24-feet) 		 

3X-BC56J-xx
     
Fibre Channel
PCI to 2-Gbit Fibre Channel adapter, 64-bit/66-MHz, single-channel 16 8 4 16 8 4 66 MHz 3.3V PCI

DS-KGPSA-DA
PCI to Fibre Channel Host Bus Adapter, 64-bit/66-MHz             66 MHz 3.3V PCI

DS-SWLA4-PD
Fibre Channel cable (BNGBX-xx)
xx=02, 03, 05, 10, 15, 30, 50 meters		  

BNGBX-xx
     
CI    
PCI CI adapter, requires two PCI slots

Each PCI CI adapter ordered requires the mandatory selection of an I/O Expansion Drawer (see Step 6)

 NA NA NA 2 1 0 33 MHz 5V

CIPCA-BA
Computer interconnect cable set, connects CIPCA to star coupler; select length xx=10, 20, 45 meters  

BNCIA-xx
     
Step 9- StorageWorks Universal Shelves
StorageWorks Model 4314R and Model 4354R Universal Drive Shelves
StorageWorks Model 4314R and 4354R Ultra3 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a DS-SL13R-Bx split-bus shelf, two SCSI channels are required. No support for Model 4314R or 4314T single-bus shelves with 3X-KZPEA-DB adapter.. Note that the depth of a DS-SL13R-xx shelf does not allow front and rear mounting.
NOTE: DS-SL13R single-bus shelves include one 12-foot VHDCI to VHDCI SCSI cable; dual-bus shelves include two 12-foot VHDCI TO VHDCI SCSI cables.
StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf includes one power supply. No support for Model 4314R single-bus shelves with embedded Ultra3SCSI adapter or 3X-KZPEA-DB adapter, US DS-SL13R-AA
StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf includes one power supply. No support for Model 4314R single-bus shelves with embedded Ultra3SCSI adapter or 3X-KZPEA-DB adapter, Japan DS-SL13R-AJ
StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, U.S. DS-SL13R-BA
StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, Japan DS-SL13R-BJ
    
Disk Drives (Supported in Model 4314R and 4354R Universal Drive Enclosures)
36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3838-AA
72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3839-AA
146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3841-AA
18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3848-AA
36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3849-AA
72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3851-AA
      
Step 10 - Storage Options
Step 10a -- Tape Devices
AIT Hot-plug Tape Drives (for use in StorageWorks Model 4314R and 4354R Universal Drive Shelves)
  • AIT hot-plug tape drives require two Universal slots
AIT 35/70-GB hot-plug LVD Universal tape drive, uses two slots in 43xxx shelves 3R-A2396-AA
AIT 50/100-GB hot-plug LVD Universal tape drive, uses two slots in 43xxx shelves 3R-A2779-AA
  
Autoloaders AIT 35-GB rackmount autoloader, 8 cartridge, U.S. 280349-001
Same as above, International 280349-B31
AIT Rail kit for rackmount autoloader 284930-001
   
AIT Tape Libraries SSL2020 AIT rackmount library with one AIT 50-GB drive and 20 slots, LVD 175196-B21
SSL2020 AIT rackmount library with two AIT 50-GB drives and 20 slots, LVD 175196-B22
   
DAT Hot-plug Tape Drive DAT 20/40-GB DDS4 hot-plug LVD Universal tape drive, uses two slots in 43xxx shelves 3R-A2780-AA
   
DLT/SDLT Tape Libraries MSL5026DLX, DLT rackmount library with 1 40/80-GB DLT tape drive, LVD 231891-B21
MSL5026DLX, DLT rackmount library with 2 40/80-GB DLT tape drives, LVD 231891-B22
MSL5026SL, SDLT rackmount library with 1 110/220-GB SDLT tape drive, LVD; graphite 302512-B21
MSL5026SL, SDLT rackmount library with 2 110/220-GB SDLT tape drives, LVD; graphite 302512-B22
MSL5026S2, SDLT rackmount library with 0 drives, LVD; graphite 293472-B21
MSL5026S2, SDLT rackmount library with 1 160/220-GB SDLT tape drive, LVD; graphite 293472-B22
MSL5026S2, SDLT rackmount library with 1 160/220-GB SDLT tape drive, LVD; graphite 293472-B23
MSL5026S2, SDLT rackmount library with 1 160/220-GB SDLT tape drive, Fibre Channel Interface; graphite 293472-B24
MSL5026S2, SDLT rackmount library with 2 160/220-GB SDLT tape drives, Fibre Channel Interface; graphite 293472-B25
 
MSL5000 SDLT2 upgrade drive, all 293475-B21
MSL5052SL SDLT rackmount library, 0 drives, LVD 255102-B21
MSL5052SL SDLT rackmount library with 2 110/220-GB drives, LVD 249491-B21
MSL5052SL SDLT 110/220-GB drive field upgrade, LVD 231823-B22
MSL5052S2, SDLT rackmount library with 2 160/220-GB SDLT tape drives, LVD; graphite 293474-B21
MSL5052S2, SDLT rackmount library with 2 160/220-GB SDLT tape drives, Fibre Channel Interface; graphite 293474-B24
 
ESL9322S2 SDLT tape library, with 2 160/320-GB SDLT tape drives, 222 slots - requires 3X-KZPCA-AA adapter 293409-B22
ESL9322S2 SDLT tape library, with 8 160/320-GB SDLT tape drives, 222 slots - requires 3X-KZPCA-AA adapter 293409-B28
ESL9322S2 SDLT tape library, with 2 160/320-GB SDLT tape drives, 322 slots - requires 3X-KZPCA-AA adapter 293410-B22
ESL9322S2 SDLT tape library, with 8 160/320-GB SDLT tape drives, 322 slots - requires 3X-KZPCA-AA adapter 293410-B28
ESL9000 SDLT2 LVD Upgrade Drive 293414-B21
ESL9595SL SDLT tape library, 0 drives, 400 slots - requires 3X-KZPCA-AA adapter 274672-B21
ESL9595SL SDLT tape library, 2 drives, 400 slots - requires 3X-KZPCA-AA adapter 274672-B22
ESL9595SL SDLT tape library, 16 drives, 400 slots - requires 3X-KZPCA-AA adapter 274672-B28
ESL9595SL SDLT tape library, 0 drives, 500 slots - requires 3X-KZPCA-AA adapter 281627-B21
ESL9595SL SDLT tape library, 2 drives, 500 slots - requires 3X-KZPCA-AA adapter 281627-B22
ESL9595SL SDLT tape library, 16 drives, 500 slots - requires 3X-KZPCA-AA adapter 281627-B28
ESL9595SL SDLT tape library, 0 drives, 595 slots - requires 3X-KZPCA-AA adapter 281628-B21
ESL9595SL SDLT tape library, 2 drives, 595 slots - requires 3X-KZPCA-AA adapter 281628-B22
ESL9595SL SDLT tape library, 16 drives, 595 slots - requires 3X-KZPCA-AA adapter