contents
 Overview   Standard Features   Systems/Options   Options   TechSpecs
line.gif (50 bytes)
spacerw.gif (802 bytes) QuickSpecs

Compaq AlphaServer DS20E
Compaq AlphaStation DS20E
spacerw.gif (802 bytes) 10445_OV.jpg (44799 bytes)
spacerw.gif (802 bytes)
At A Glance

AlphaServer?/font> /AlphaStation?/font> DS20E Systems include:

  • Alpha 21264 667-MHz or 833-MHz processor (dual processor capability)
  • 8-MB level DDR cache per processor
  • ECC-protected memory bus and cache
  • 512-MB or 1-GB SDRAM memory expandable to 4 GB
  • Five PCI and one shared PCI/ISA slot (six total slots)
  • Six hot swap hard disk drive bays
  • Internal mass storage capacity up to 876 GB
  • Integrated environmental server management module
  • Two 375-Watt hot pluggable power supplies with optional third for N+1 redundancy
  • Combo 24X CD-ROM drive and 1.44-MB floppy disk drive
  • Protected by HP Services, including a three-year on-site limited warranty
contents
 Overview   Standard Features   Systems/Options   Options   TechSpecs
line.gif (50 bytes)
spacerw.gif (802 bytes) Standard Features
Processor Alpha 21264 667-MHz or 833-MHz processor
  
Cache Memory 8-MB level 2 dual data rate cache per processor
 
Upgradability System upgradable to dual processing
 
Memory Minimum 512-MB or 1-GB ECC SDRAM memory standard
Maximum 4 GB
 
Network Controller Choice of Ethernet controllers
 
Expansion I/O (Total) 6
PCI 5
Shared PCI/ISA 1
 
Storage Controller Choice of storage controllers
 
Storage Diskette Drive 1.44 MB
CD-ROM 24X Max IDE CD-ROM Drive
Internal Hard Drives Choice of 18.2-GB, 36.4-GB, 72.8-GB, or 146-GB drives
Maximum Internal Storage 876 GB
 
Interfaces Parallel 1
Serial 2
Pointing Device (Mouse) 1
Keyboard 1
SCSI knockouts on rear of chassis 6
Parallel 1
 
Form Factor Rackmount or Tower
 
Manageability Compaq Insight Manager?/font>
Power Supply Two 375-Watt hot plug power supplies, standard; optional third N+1 for redundancy
Hot plug redundant power supply support; hot plug fan support
 
OS Support AlphaServer DS20E Tru64?/font> UNIX?/font> systems include pre-installed software (V5.1A), Base license, Unlimited User license, Server Extension license, Internet Express, and Compaq Secure Web Server
AlphaStation DS20E Tru64 UNIX systems include pre-installed software (V5.1A), 2-user Base license
AlphaServer DS20E OpenVMS?/font> systems include pre-installed software (V7.3), Base license with System Manager license and Enterprise Integration Server License Package for OpenVMS V3.1
AlphaStation DS20E OpenVMS systems include pre-installed software (V7.3), Base license, Concurrent Use
1-user license, and NAS 150 Client license
Minimum OS support: Tru64 UNIX V4.0F, OpenVMS V7.1-2 or V7.2-1
 
Service and Support HP Services provides a wide range of service offerings including a three-year limited warranty fully supported by a worldwide network of resellers and service providers; lifetime toll-free 7 x 24 hardware technical phone support.
contents
 Overview   Standard Features   Systems/Options   Options   TechSpecs
line.gif (50 bytes)
spacerw.gif (802 bytes) Systems/Options
Step 1 - Select system
AlphaServer/AlphaStation DS20E systems require the mandatory selection of the following items:
  • Pedestal/tower or rackmount bezel kit
  • Disk drive cage
  • LVD SCSI adapter
  • System disk drive
  • Ethernet adapter
  • Power cord
  • Software media and documentation for first system onsite
 
NOTES: DS20E minimum OS support - Tru64 UNIX V4.0F, OpenVMS V7.1-2 or V7.2-1
Keyboard and mouse not included.
 
AlphaServer DS20E Systems
OS CPU Memory/Cache Order Number
Tru64 UNIX 667 MHz 512 MB/8 MB DA-56PAB-EA
Tru64 UNIX 667 MHz 1 GB/8 MB DA-56PAB-FA
Tru64 UNIX 833 MHz 512 MB/8 MB DA-56RAA-EA
Tru64 UNIX 833 MHz 1 GB/8 MB DA-56RAA-FA
     
OpenVMS 667 MHz 512 MB/8 MB DY-56PAB-EA
OpenVMS 667 MHz 1 GB/8 MB DY-56PAB-FA
OpenVMS 833 MHz 512 MB/8 MB DY-56RAA-EA
OpenVMS 833 MHz 1 GB/8 MB DY-56RAA-FA
 
AlphaStation DS20E Systems
Tru64 UNIX 667 MHz 512 MB/8 MB DA-56PAB-EW
Tru64 UNIX 667 MHz 1 GB/8 MB DA-56PAB-FW
Tru64 UNIX 833 MHz 512 MB/8 MB DA-56RAA-EW
Tru64 UNIX 833 MHz 1 GB/8 MB DA-56RAA-FW
        
OpenVMS 667 MHz 512 MB/8 MB DY-56PAB-EW
OpenVMS 667 MHz 1 GB/8 MB DY-56PAB-FW
OpenVMS 833 MHz 512 MB/8 MB DY-56RAA-EW
OpenVMS 833 MHz 1 GB/8 MB DY-56RAA-FW
   
Step 2 - Select mandatory options
Step 2a - Bezel Kits - Mandatory
  • Pedestal/Tower kit or Rackmount kit is mandatory for each system
Pedestal/Tower bezel kit 3X-BA56P-PB
Rackmount bezel kit (M-Series Cabinets) 3X-BA56R-RC
Rackmount bezel kit for Compaq Series 9000 Cabinets (Onsite integration only – contact CustomSystems if factory integration is required) 3X-BA56R-RE
 
Step 2b - Disk Drive Cage - Mandatory
  • Systems support one disk drive cage; disk drive cage supports six 3.5-inch hard disk drives
6-bay disk drive cage

BA610-6D
contents
 Overview   Standard Features   Systems/Options   Options   TechSpecs
line.gif (50 bytes)
spacerw.gif (802 bytes) Options
Step 2c - SCSI Adapter - Mandatory
  • Selection of LVD SCSI adapter to connect to internal disk drive cage is mandatory; SCSI cable included with disk-drive cage
Single-channel LVD adapter, maximum four per system 3X-KZPCA-AA
PCI 2-channel multimode Ultra3 LVD SCSI adapter VHDCI (Tru64 UNIX 5.1 or higher and OpenVMS V7.2-2 or higher)
NOTE: Patch kit required, kit available at http://ftp1.support.compaq.com/public/Digital_UNIX/v5.1/
No shared SCSI or SDLT tape/library support.		 3X-KZPEA-DB
PCI-to-10/100 MBPS Ethernet, graphics, LVD SCSI combination adapter, maximum one per system (cannot be installed in PCI slot 1) 3X-DEPVZ-AA
PCI 1-channel Ultra2 LVD backplane RAID controller, 64-bit, 16-MB cache

NOTES:
Supported with BA610-6D, BA356, and DS-SL13R-xx or DS-SSL14-RX shelves only.
When installed in BA356 shelves, part number DS-BA35X-FC is required for non-factory installations.
Graphics card is required to run the DS-KZPCC-AC console utilities (SMOR) with SRM console versions lower than V6.0 or, alternatively can be run via serial line and terminal emulation software for SRM V6.0 or higher. PB2GA-JC/JD graphics cards are not supported.
EV6 systems not supported. Platform part numbers supported in:
DA-56PAB-EA/FA/EW/FW and DA-56RAA-EA/FA/EW/FW.

  • Specific patches required for specific revs of operating system. See DS-KZPCC-AC/CE QuickSpecs for latest details and other configuration information.
    Tru64 UNIX V4.0F requires NHD3 and Patch Kit 4 (BL15) or later
    Tru64 UNIX V5.1 requires Patch Kit 3 (BL17) and Early Release Patch C462.
    - Patch Kit 3 (BL17) located at:
    T64V5117-C0046202-11060-Manual-ER-20010615.tar
    - Patch C462.02 located at:     http://ftp1.support.compaq.com/public/unix/v5.1/

DS-KZPCC-AC/CE RAID controllers support standalone and cluster configurations; no support as boot device or primary device in cluster configurations;
TruCluster V5.1 (restricted to non-shared buses only)

 DS-KZPCC-AC
PCI 3-channel Ultra2 LVD RAID controller, 64-bit, 64-MB cache
NOTES:
Supported with BA610-6D, BA356 and DS-SL13R-xx or DS-SSL14-RX shelves only.
When installed in BA356 shelves, part number DS-BA35X-FC is required for non-factory installations.
Graphics card is required to run the DS-KZPCC-AC console utilities (SMOR) with SRM console versions lower than V6.0 or, alternatively can be run via serial line and terminal emulation software for SRM V6.0 or higher. PB2GA-JC/JD graphics cards are not supported.
EV6 systems not supported. Platform part numbers supported in:
DA-56PAB-EA/FA/EW/FW and DA-56RAA-EA/FA/EW/FW.
  • Specific patches required for specific revs of operating system. See DS-KZPCC-AC/CE QuickSpecs for latest details and other configuration information.
    Tru64 UNIX V4.0F requires NHD3 and Patch Kit 4 (BL15) or later
    Tru64 UNIX V5.1 requires Patch Kit 3 (BL17) and Early Release Patch C462.
    - Patch Kit 3 (BL17) located at:
    T64V5117-C0046202-11060-Manual-ER-20010615.tar
    - Patch C462.02 located at:     http://ftp1.support.compaq.com/public/unix/v5.1/

DS-KZPCC-AC/CE RAID controllers support standalone and cluster configurations; no support as boot device or primary device in cluster configurations;
TruCluster V5.1 (restricted to non-shared buses only)

 DS-KZPCC-CE
PCI 2-channel U160 SCSI backplane RAID controller, 128-MB cache, requires use of U160 SCSI cables (uses one PCI slot); requires connection to BA610-6D disk card cage or DS-SL13R-xx Universal StorageWorks shelf. Restricted to Hose One slot (furthest away from memory). Platform part numbers supported in: DY-56PAB-EA/FA/EW/FW and DY-56RAA-EA/FA/EW/FW.
Host based volume shadowing or shared bus not supported.		 3X-KZPDC-BE
PCI 4-channel U160 SCSI backplane RAID controller, 256-MB cache, ADG Standard, requires use of U160 SCSI cables (uses one PCI slot); requires connection to BA610-6D disk card cage or DS-SL13R-xx Universal StorageWorks shelf. Restricted to Hose One slot (furthest away from memory). Platform part numbers supported in: DY-56PAB-EA/FA/EW/FW and DY-56RAA-EA/FA/EW/FW.
Host based volume shadowing or shared bus not supported.

3X-KZPDC-DF
 
Step 2d - System Disk Drive (Supported in Disk Drive Cage) - Mandatory
  • Selection of one disk drive is mandatory
18.2-GB Ultra3 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A0585-AA
18.2-GB Ultra3 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A1543-AA
36.4-GB Ultra3 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A0919-AA
36.4-GB Ultra3 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3079-AA
72.8-GB Ultra3 (LVD) 10,000 rpm 1-inch Universal disk drive 3R-A3050-AA
18.2-GB U320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3848-AA
36.4-GB U320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3838-AA
36.4-GB U320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3849-AA
72.8-GB U320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3839-AA
72.8-GB U320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3851-AA
146-GB U320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3841-AA
Ultra Universal drive height converter, 4-pack; required for installed base customers with earlier 4-slot drive cages (3X-BA611-4D) when ordering 1-inch universal drives 3R-A0528-AA
Step 2e - Ethernet Adapters - Mandatory
  • Selection of one Ethernet adapter is mandatory (Ethernet adapter is not required if KZPCM or 3X-DEPVZ-AA adapter is selected)
  • See Step 14 for additional networking options
PCI (32-bit, 33-MHz) single-port 10/100 Ethernet (UTP/RJ45) NIC
Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables, maximum four per system.		 3X-DE600-AA
PCI (32/64-bit, 33-MHz to 66-MHz) dual-port 10/100 Ethernet, maximum two per system, maximum eight 10/100 Ethernet ports per system. 3X-DE602-AA
Single-port 100 Mbps (MMF/duplex-SC) add-on daughter card for use with the
3X-DE602-BB. The combined 3X-DE602-BB and 3X-DE602-FA provides two 10/100 (UTP/RJ45s) and one 100Mbps (MMF/SC) ports in a single PCI slot option.
NOTE: 3X-DE602-FA cannot be used standalone.
Maximum two per system, maximum eight 10/100 Ethernet ports per system. Use BN34A or BN34B cables.		 3X-DE602-FA
PCI (32/64-bit, 33-MHz to 66-MHz) dual-port 10/100 Ethernet (UTP/RJ45s) NIC and Base Module. (One 3X-DE602-TA or 3X-DE602-FA optional add-on daughter card can be combined with this module.) Maximum two per system, maximum eight 10/100 Ethernet ports per system.
NOTE: Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.		 3X-DE602-BB
Dual-port 10/100 Ethernet (UTP/RJ45) add-on daughter card for use with the
3X-DE602-BB only. The combined 3X-DE602-BB and 3X-DE602-TA modules provide four 10/100 (UTP/RJ45s) ports in a single PCI slot option; allows for a maximum of 16 ports per system. Maximum two per system, maximum eight 10/100 Ethernet ports per system.
NOTE: 3X-DE602-TA cannot be used standalone.
OpenVMS V7.3 requires Tima Kit:
- DEC-AXPVMS-VMS73_LAN-V0100—4.PCSI
Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.		 3X-DE602-TA
PCI 10/100 Mbit 4-port Ethernet adapter, UTP, maximum one per system DE504-BA
PCI Video/NIC Combo adapter, 3Dlabs Permedia P2 graphics with 4-MB VRAM, single-port 10/100 Mbit Fast Ethernet, maximum one per system 3X-DEPVD-AA
Cable for 10BaseT twisted pair connection

BN25G-xx
  
Step 2f - Power Cords - Mandatory
  • Selection of one power cord is mandatory for all systems.
 
Pedestal Power Cords North American 120V, 75-inch BN26J-1K
Australia, New Zealand, 2.5-meter (103541-511) BN19H-2E
Central Europe, 2.5-meter BN19C-2E
Denmark, 2.5-meter (103541-481) BN19K-2E
Egypt, India, South Africa, 2.5-meter (103541-AR1) BN19S-2E
Israel, 2.5-meter BN18L-2E
Italy, 2.5-meter (103541-461) BN35M-02
Japan, 2.5-meter 3X-BN46F-02
Switzerland, 2.5-meter (103541-511) BN19E-2E
UK, Ireland, 2.5-meter BN19A-2E
 
Rackmount Power Cords U.S./Canada BN20Z-4E
Non-U.S. BN35S-4E
Japan, 2.5-meter 3X-BN46D-4E
  
Step 3 - Additional CPU Modules - Optional
  • One 6/667-MHz or 6/833-MHz CPU included, one additional CPU supported, second CPU must be the same speed.
SMP upgrade includes one 6/667-MHz CPU with 8-MB cache and Tru64 UNIX SMP license KN311-CB
SMP upgrade includes one 6/667-MHz CPU with 8-MB cache and OpenVMS SMP license KN311-CC
SMP upgrade includes one 6/833-MHz CPU with 8-MB cache and Tru64 UNIX SMP license KN312-BB
SMP upgrade includes one 6/833-MHz CPU with 8-MB cache and OpenVMS SMP license KN312-BC
  
Step 4 - Memory - Optional
  • System includes one memory option; up to three additional memory options can be added
512-MB memory option (4 x 128-MB DIMMs) MS340-DA
1-GB memory option (4 x 256-MB DIMMs) MS340-EA
  
Step 5 - Additional Power Supplies - Optional
  • Two 375 watt power supplies included with system; optional third power supply provides N+1 redundancy
DS20E redundant power supply

FR-H7910-AA
  
Step 6 - Internal Removable Storage - Optional
  • System supports three internal removable media devices:
  • One combo 24X CD-ROM drive and 1.44-MB disk drive
    •
  • One additional removable media slot provides support for one 5.25-inch half-height device; requires KZPBA-CA or KZPCM-DA UltraSCSI adapter, or 3X-KZPCA-AA or 3X-DEPVZ-AA Ultra2 (LVD) adapter, or 3X-KZPEA-DB Ultra3 (LVD) adapter, and SCSI cable 3X-BC56C-2F
    For optimum performance it is recommended that Ultra2 capable devices be connected to at least an Ultra2 capable adapter.
DAT 12/24-GB 4 mm SCSI tape drive (TLZ10) 5.25-inch half-height, top gun blue TLZ10-LB
DAT 5.25-inch half-height 20/40-GB 4 mm Ultra2 (LVD) SCSI tape drive, top gun blue 3X-SD20X-LB
AIT 5.25-inch half-height 35/70-GB 8 mm Wide UltraSCSI tape drive, top gun blue 3X-SZ35X-LB
AIT 5.25-inch half-height 50/100-GB 8 mm Ultra2 (LVD) SCSI tape drive, top gun blue 3X-SZ50X-LB
AIT 5.25-inch half-height 35/70-GB 8 mm LVD UltraSCSI tape drive, carbon black; requires 3X-KZPCA-AA or 3X-DEPVZ-AA LVD adapter 3R-A2392-AA
AIT 35/70-GB hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves, requires 3X-KZPCA-AA, 3X-DEPVZ-AA LVD, or 3X-KZPEA-DB adapter 3R-A2396-AA
AIT 50/100-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves, requires 3X-KZPCA-AA,3X-DEPVZ-AA LVD, or 3X-KZPEA-DB adapter 3R-A2779-AA
DAT 20/40-GB DDS4 hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves, requires 3X-KZPCA-AA LVD or 3X-KZPEA-DB adapter 3R-A2780-AA
SCSI cable with one connector and active terminator to connect optional PCI adapter to 5.25-inch device 3X-BC56C-2F
  
Step 7 - External Storage - Optional
UltraSCSI StorageWorks BA36R Shelf – Requires selection of UltraSCSI adapter and SCSI cable
  • StorageWorks Shelf supports seven 3.5-inch x 1.6-inch hard disk drives; with addition of redundant power supply, only six drives are supported
  • StorageWorks shelf kits are mounted back-to-back in M-Series cabinets
StorageWorks UltraSCSI single-bus shelf kit BA36R-RC
StorageWorks UltraSCSI split-bus shelf kit BA36R-RD
  
StorageWorks Model 4314R and Model 4354R Universal Drive Shelves
  • StorageWorks Model 4314R and 4354R Ultra3 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a DS-SL13R-xx split-bus shelf, order two 3X-KZPCA-AA adapters with BN38C-xx cables, or one 3X-KZPEA-DB with BN37A-xx cables. Model 43xx shelves are compatible with Wide Ultra2 or Ultra3 (LVD) adapters only. Note that the depth of a DS-SL13R-xx shelf does not allow front and rear mounting. 3X-KZPEA-DB adapter does not support SDLT tapes.
StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf,for North America and International use, except Japan (190209-001) DS-SL13R-AA
StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, Japan (190209-291) DS-SL13R-AJ
StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf for North America and International use, except Japan (190211-001) DS-SL13R-BA
StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, Japan (190211-291) DS-SL13R-BJ
  
StorageWorks Model 4314T Standalone Enclosure for Universal Drives Model 4314T Ultra3 SCSI, single-bus tower enclosure, U.S. (190210-001) DS-SL13T-AA
Model 4314T Ultra3 SCSI, single-bus tower enclosure, International (190210-B31) DS-SL13T-AB
Model 4314T Ultra3 SCSI, single-bus tower enclosure, Japan (190210-291) DS-SL13T-AJ
 
StorageWorks Model 4314 Options StorageWorks enclosure redundant power supply (119826-B21)

DS-SE2UP-AA
  
Step 8 - Storage Devices - Optional
Disk Drives
(Supported in Model 4314R, Model 4354R, or Model 4314T Universal Drive Shelves)		 18.2-GB Ultra3 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A0585-AA
18.2-GB Ultra3 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A1543-AA
36.4-GB Ultra3 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A0919-AA
36.4-GB Ultra3 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3079-AA
72.8-GB Ultra3 (LVD) 10,000 rpm 1-inch Universal disk drive 3R-A3050-AA
18.2-GB U320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3848-AA
36.4-GB U320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3838-AA
36.4-GB U320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3849-AA
72.8-GB U320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3839-AA
72.8-GB U320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3851-AA
146-GB U320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3841-AA
Disk Drives
(Supported in StorageWorks BA356/BA36R Shelves)		 9.1-GB UltraSCSI 10,000 rpm disk drive DS-RZ1DD-VW
18.2-GB UltraSCSI 10,000 rpm disk drive DS-RZ1ED-VW
36.4-GB UltraSCSI 10,000 rpm disk drive DS-RZ1FC-VW
  
AIT Tape Drives (Internal) AIT 5.25-inch half-height 35/70-GB 8-mm Wide UltraSCSI tape drive, top gun blue; requires single ended UltraSCSI adapter or Ultra2 adapter (KZPBA-CA, 3X-DEPVZ-AA, KZPCM-DA, or 3X-KZPCA-AA) and SCSI cable (3X-BC56C-2F) 3X-SZ35X-LB
AIT 5.25-inch half-height 50/100-GB 8-mm Ultra2 (LVD) SCSI tape drive, top gun blue; requires Ultra2 (LVD) adapter and SCSI cable (3X-BC56C-2F) 3X-SZ50X-LB
  
AIT Tabletop Tape Drives AIT 35/70-GB 8-mm LVD tabletop tape drive, North America carbon black; requires LVD adapter 216885-001
Same as above, International 216885-B31
Same as above, Japan 216885-291
AIT 50/100-GB 8-mm SCSI tabletop tape drive with 120V North American power cord, carbon black; requires Ultra2 (LVD) adapter 157767-002
Same as above, International 157767-B32
Same as above, Japan 157767-292
  
AIT Hot-plug Tape Drives
  • AIT hot-plug tape drives require two Universal slots
AIT 35/70-GB hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves 3R-A2396-AA
AIT 50/100-GB hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves 3R-A2779-AA
  
AIT Autoloaders AIT 35-GB tabletop autoloader, 8 cartridge, U.S. 292355-001
Same as above, International 292355-B31
AIT 35-GB rackmount autoloader, 8 cartridge, U.S. 280349-001
Same as above, International 280349-B31
AIT Rail kit for rackmount autoloader 284930-001
  
AIT Tape Libraries SSL2020 AIT tabletop library with one AIT 50-GB drive and 20 slots, LVD 175195-B21
SSL2020 AIT tabletop library with two AIT 50-GB drives and 20 slots, LVD 175195-B22
SSL2020 AIT rackmount library with one AIT 50-GB drive and 20 slots, LVD 175196-B21
SSL2020 AIT rackmount library with two AIT 50-GB drives and 20 slots, LVD 175196-B22
  
DAT Tape Drives (Internal) DAT 12/24-GB 4-mm 5.25-inch half-height SCSI tape drive, top gun blue; requires single-ended UltraSCSI or Ultra2 adapter (KZPBA-CA, 3X-DEPVZ-AA, 3X-KZPCA-AA, or KZPCM-DA) and SCSI cable (3X-BC56C-2F) TLZ10-LB
DAT 20/40-GB 4-mm 5.25-inch half-height Ultra2 (LVD) SCSI tape drive, top gun blue; requires Ultra2 (LVD) adapter and SCSI cable (3X-BC56C-2F) 3X-SD20X-LB
DAT 12/24-GB 4-mm narrow SCSI tape drive in StorageWorks carrier DS-TLZ10-VA
DAT 12/24-GB 4-mm narrow single-ended tabletop SCSI tape, includes 120V North American power cord, requires BN31W-xx SCSI cable DS-TLZ10-DB
  
DAT Tabletop Tape Drives DAT 20/40-GB 4-mm Wide Ultra2 (LVD) tabletop SCSI tape drive with 120V North American power cord, carbon black; requires Ultra2 (LVD) adapter 157770-002
Same as above, International 157770-B32
Same as above, Japan 157770-292
  
DAT Hot-plug Tape Drive DAT 20/40-GB DDS4 hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves

3R-A2780-AA
 
DAT Autoloaders DAT 20/40-GB auto loader external; requires BN31W-xx SCSI cable and
3X-KZPCA-AA, or 3X-DEPVZ-AA adapter, North America		 166505-001
Same as above, International 166505-B31
Same as above, Japan 166505-291
  
DLT/SDLT Tabletop Tape Drives NOTE: 3X-KZPEA-DB does not support SDLT tapes/libraries.
DLT8000 tabletop 40/80-GB DLT external tape drive, carbon black - requires 3X-KZPCA-AA LVD adapter - U.S. 146197-B23
Same as above – Japan 146197-292
SDLT tabletop 110/220-GB external tape drive, carbon black- requires 3X-KZPCA-AA LVD adapter - U.S. 192103-002
Same as above – International 192103-B32
Same as above – Japan 192103-292
SDLT tabletop 160/320-GB external tape drive, carbon black - requires 3X-KZPCA-AA LVD adapter - U.S. 257319-001
Same as above - International 257319-B31
Same as above - Japan 257319-291
  
DLT/SDLT Tape Libraries NOTE: 3X-KZPEA-DB does not support SDLT tapes/libraries.
Rackmount kit for H9Axx M-Series cabinets – required for mounting MSL5000 series in M-Series cabinets 254795-001
MSL5026DLX, DLT tabletop library with 1 40/80-GB DLT tape drive, LVD 231821-B21
MSL5026DLX, DLT tabletop library with 2 40/80-GB DLT tape drives, LVD 231821-B22
MSL5026DLX or MSL5026SL, DLT/SDLT rackmount library, 0 drives – requires rackmount kit (254795-001) 231979-B21
MSL5026DLX, DLT rackmount library with 1 40/80-GB DLT tape drive, LVD – requires rackmount kit (254795-001) 231891-B21
MSL5026DLX, DLT rackmount library with 2 40/80-GB DLT tape drives, LVD – requires rackmount kit (254795-001) 231891-B22
MSL5026SL, SDLT tabletop library with 1 110/220-GB SDLT tape drive, LVD 231822-B21
MSL5026SL, SDLT tabletop library with 2 110/220-GB SDLT tape drives, LVD 231822-B22
MSL5026SL, SDLT rackmount library with 1 110/220-GB SDLT tape drive, LVD – requires rackmount kit (254795-001) 231892-B21
MSL5026SL, SDLT rackmount library with 2 110/220-GB SDLT tape drives, LVD – requires rackmount kit (254795-001) 231892-B22
MSL5026SL, SDLT tabletop library with one 110/220-GB SDLT tape drive, LVD (Graphite) 302511-B21
MSL5026SL, SDLT tabletop library with two 110/220-GB SDLT tape drives, LVD (Graphite) 302511-B22
MSL5026SL, SDLT rackmount library with one 110/220-GB SDLT tape drive, LVD (Graphite) 302512-B21
MSL5026SL, SDLT rackmount library with two 110/220-GB SDLT tape drives, LVD (Graphite) 302512-B22
MSL5026S2, SDLT2 tabletop library with one 160/320-GB SDLT tape drive, LVD 293473-B21
MSL5026S2, SDLT2 tabletop library with two 160/320-GB SDLT tape drives, LVD 293473-B22
MSL5026S2 SDLT rackmount library, 0 drives, LVD – requires rackmount kit (254795-001) 293472-B21
MSL5026S2, SDLT2 rackmount library with one 160/320-GB SDLT tape drive, LVD 293472-B22
MSL5026S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive, LVD 293472-B23
MSL5026S2, SDLT2 rackmount library with one 160/320-GB SDLT tape drive with Fibre Channel, LVD 293472-B24
MSL5026S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive with Fibre Channel, LVD 293472-B25
 
MSL5052, 0 drives, LVD, rackmount 255102-B21
MSL5052SL SDLT tabletop library with 2 110/220-GB drives, LVD 249490-B21
MSL5052SL SDLT rackmount library with 2 110/220-GB drives, LVD – requires rackmount kit (254795-001) 249491-B21
MSL5052SL SDLT 110/220-GB drive field upgrade, LVD 231823-B22
MSL5052S2, SDLT2 tabletop library with two 160/320-GB SDLT tape drives, LVD, graphite 293476-B21
MSL5052S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive, LVD 293474-B21
MSL5052S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive with Fibre Channel, LVD 293474-B24
  
ESL9322S2 SDLT2 tape library, two 160/320GB SDLT tape drives, 222 slots - requires 3X-KZPCA-AA adapter 293409-B22
ESL9322S2 SDLT2 tape library, eight 160/320GB SDLT tape drives, 222 slots - requires 3X-KZPCA-AA adapter 293409-B28
ESL9322S2 SDLT2 tape library, two 160/320GB SDLT tape drives, 322 slots - requires 3X-KZPCA-AA adapter 293410-B22
ESL9322S2 SDLT2 tape library, eight 160/320GB SDLT tape drives, 322 slots - requires 3X-KZPCA-AA adapter 293410-B28
ESL9326SL SDLT tape library with six 110/220-GB SDLT tape drives, LVD 234615-B21
ESL9326SL SDLT tape library with eight 110/220-GB SDLT tape drives, LVD 234615-B22
ESL9326SL SDLT tape library with 16 110/220-GB SDLT tape drives, LVD 234615-B26
  
3U Rackmount Tape Drive Enclosure 3U LVD Rackmount Tape Drive Enclosure for use in H9Axx M-Series Cabinets, 0 drives, carbon black, 274338-B21
Rackmount Kit for H9Axx Series Cabinets, carbon black – required for mounting 3U Rackmount Tape Drive Enclosure in M-Series cabinet 3R-A3804-AA
NOTE: The 3U Tape Drive Enclosure supports up to four internal half-height removable devices, or up to two full height devices. Select up to four AIT or DAT devices, or two DLT/SDLT devices with 3U Rackmount Tape Drive Enclosure (274338-B21), or select preconfigured configurations listed below.
AIT 35/70-GB 3U tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black 216884-B21
AIT 50/100-GB 3U tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black (157766-B22) 3R-A3753-AA
DAT 20/40-GB 3U tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black (157769-B22) 3R-A3752-AA
DLT8000 40/80-GB tape drive, requires 3X-KZPCA-AA LVD adapter 146196-B22
SDLT 110/220-GB tape drive, requires 3X-KZPCA-AA LVD adapter 192106-B25
SDLT 160/320-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black 257319-B21
  
Preconfigured Configurations
AIT 50-GB 3U rackmount kit, carbon black 274333-B21
DLT 40/80-GB, 3U rackmount kit, carbon black 274332-B21
DLT 40/80-GB, dual-drive, 3U rackmount kit, carbon black 274335-B21
SDLT 110/220-GB, 3U rackmount kit, carbon black 274331-B21
SDLT 110/220-GB, dual-drive, 3U rackmount kit, carbon black 274334-B21
  
5U Rackmount Tape Drive Enclosure 5U LVD Rackmount Tape Drive Enclosure, carbon black, for use in H9Axx M-Series Cabinets, 0 drives 274339-B21
Rackmount Kit for H9Axx Series Cabinets, carbon black - required for mounting 5U Rackmount Tape Drive Enclosure in M-Series cabinet 254795-001
NOTE: The 5U Rackmount Tape Drive Enclosure supports four full-height devices; select up to four DLT or SDLT devices with 274339-B21, or select preconfigured configurations listed below.
DLT8000 40/80-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black 146196-B22
SDLT 110/220-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black 192106-B25
SDLT 160/320-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black 257319-B21
  
Preconfigured Configurations
SDLT 110/220-GB Tape Array III, 5U rackmount kit, carbon black 274336-B21
DLT 40/80-GB Tape Array III, 5U rackmount kit, carbon black 274337-B21
DLT Tape Array III Model 0 enclosure, U.S. 168047-001
Same as above, International 168047-B31
Same as above, Japan 168047-291
DAT 12/24-GB 4-mm narrow SCSI tape drive in StorageWorks carrier DS-TLZ10-VA
  
Removable Media Devices for External StorageWorks Shelves DLT 40/80-GB tape drive in StorageWorks carrier

DS-TZ90N-VW
  
Modular Data Routers The following Modular Data Routers are supported with MSL5000 and ESL9000 tape libraries:
One Fibre channel x 2 HVD Data Router (163082-B21) 3R-A2673-AA
One Fibre channel x 2 LVD Data Router (163083-B21) 3R-A2774-AA
Two Fibre channel x 4 LVD Data Router (262653-B21) 3R-A3740-AA
Two Fibre channel x 4 HVD Data Router (262654-B21) 3R-A3741-AA
UltraSCSI Hubs UltraSCSI hub with three differential ports, no single-ended ports, consists of two host ports and one storage port in 3.5-inch SBB, UltraSCSI cables not included DS-DWZZH-03
UltraSCSI hub with five differential ports, no single-ended ports, consists of four host ports and one storage port in 3.5-inch SBB, UltraSCSI cables not included DS-DWZZH-05
  
StorageWorks Fibre Channel Switches Fibre Channel SAN Switch, 8 ports, 2 Gb, with Fabric Operating Software (Tru64 UNIX and OpenVMS) – requires Tru64 UNIX V5.1A patch kit: T64V51AB01AS0001-20020116.tar (258707-B21) DS-DSGGD-AC
Fibre Channel SAN Switch, 16 ports, 2 Gb, with Fabric Operating Software (Tru64 UNIX and OpenVMS) – requires Tru64 UNIX V5.1A patch kit: T64V51AB01AS0001-20020116.tar (283056-B21) DS-DSGGD-AD
Fibre Channel SAN Switch, 16 ports, 2-Gb, with Fabric Operating Software, two power supplies (Tru64 UNIX and OpenVMS) – requires Tru64 UNIX V5.1A patch kit: T64V51AB01AS0001-20020116.tar (287055-B21)
DS-DSGGD-BA
Fibre Channel 2-Gb 64-port Core Switch, with Fabric Operating software DS-DSGGE-AB
Long wave GBIC (127508-B21) DS-DSGGA-MA
Short wave optical GBIC (380561-B21) DS-DXGGA-SA
  
McData 64-port Fibre Channel SAN Director Class Switches SAN Director 64 (1 GB) 32 ports, base model DS-DMGGD-AA
SAN Director Connectivity Manager Kit DS-DMGGO-AA
SAN Director 2 Gb, 64 ports DS-DMGGD-BA
SAN Edge Switch 2 Gb, 32 ports DS-DMGGE-BC
SAN Edge Switch 2 Gb, 16-ports DS-DMGGE-BB
NOTE: Connection for, or between, 1-Gb and/or 2-Gb SAN switches requires different cables. Refer to the Switches, Hubs, and Interconnects QuickSpecs at: http://www.compaq.com/products/quickspecs/
North_America/10490.html
  
Fibre Channel Disk Drives 36-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4mm) drive (238590-B21) 3R-A3239-AA
72-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4mm) drive (238921-B21) 3R-A3260-AA
36-GB 15K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4mm) drive (236205-B21)